Basic Info.
Type
Silicon Piezoresistive Type
Structure Design
Straight Bar Type
Pressure Range
High Pressure
Accuracy Grade
±0.1% Fs ±0.25% Fs(Typical)
Specification
stainless steel
Product Description
Product overview
ANL346 level recorder could measure the undergrand water by power supply or battery supply.It is stainless steel structure which could long term recorde the depth, pressure, and temeperature of water. It contains lever transmitter, temperature transmitter, and non-volatile memory and long-life Lithium batteries which all in the steel shell housing of 24mm diameter. It suitable for the measurement of underground water and marine.
Features
·High stability level measurement sensor element
·High accuracy 0.05%F.S
·Temperature resolution 0.05ºC
·Temperature compensation in whole temperature zone ,digital calibration in whole measurement range
·Strong overload capability
·Wide range power supply, 5~30VDC
·RS485 MODBUS-RTU ,could use in DCS or PLC
·Circular record 25984
·Low power consumption
·Working current<5μA in sleep preventer
·Surge-proof , Reverse power protection
·Stainless steel (or titanium alloy) shell housing sealed structure, IP68 2.Installation2.1Power supplyPower supply could be between 5VDC-30VDC with reverse power protection,intermittent power supply support; Meanwhile with 3.6V battery could suppler power when there is no power supply, keeping continuous measure and record.
2.2 Communication interface
It has industrial RS485, half duplex subordinate working, transmission distance could be 1200 meter, baud rate could choose 9600,19200,38400,57600;
Serial Port communication, default is COM1, it will be work according the actual connection. Baud rate could choose 9600,19200,38400,57600(Bit/s),default is 9600.
- Bit:parity check: odd, even, None as default.
- Stop Bit: 1 or 2, 1 as default.
- Data Bit: 8 data bit.
MODBUS-RTU ; When it connect with power supply, command could be sent by software or MDOBUS(e.g. RTU )like, level and temperature measurement. 2.3 Fixation
It is integrated structure with shielded cable. The long cable adds steel in order to increase the tensile strength and stability. The probe will be lifting installed in the top of detective well and fixed by steel.
It's better to add a protection shell for cable connection to prevent from the vent block and should install the shielded wire. 3.Wiring 3.1 Wiring
There is one 4-core cable for power supply and telecommunicaiton which is red, yellow,blue and green.
3.2 Computer connection
The blowing accessories would be need:
RS232<->RS485 transitter
USB<->RS232 transmitter
USB<->RS485 transmitter
Connection:Blue cable(RS485-A) connects RS485+(T+);green cable (RS485-B)connects RS485-(T-);USB cable connects to computer, and then you can check the port number and use it in software.
4.Setting
4.1 Tel-communication setting
Please aware that the tele data is right which means the computer or MODBUS port is same with the production when you firstly use this product. The default data of port is 9600, 8,n,1;tele communication add is"1". It will be work once the telecommunication data was changed(don't need to turn off the power),meanwhile the date of computer should be set as same as the products.
4.2 Measurement setting In the very first use, please setting the measure time according the test,min is 1 minutes, max is 99 minutes. After measure time(ΔT)was set, every measure time, the product will measure and record data once, including level, temperature, pressure, time, voltage. The default time is 60 minutes.
4.3 User calibration
The product could be user calibrated for zero level and density in order to adjust the application condition and media. It was calibrated before delivery, it doesn't need to be calibrated. If you want to calibrated, please follow technology engineer.
5.Data collection
5.1 Collection by command
The data could be collected through MODBUS-RTU or 03H in software when it connects with computer or RTU.
5.2 Auto collection
It could auto collected the data while it's the measure time even if it has not connected with power and other equipment. The auto collection will be stopped when the voltage is lower than 2.7V.
6. Historical data
It has 20 byte in every historical data. It could store 25984 data in total. These will be divided into 128pcs which every piece has 203 data. It will turn to first piece data record automatically and clear it. And then record the data by analogy.
Historical data could be download but not search. Download 25984 data
will be use:
7.MODBUS use
7.1 Use software or program
7.2 Use computer connection
7.2.1 Coud adjust the software from port
7.2.2 Could use software we suppled
7.2.3 Could develop your owen software
About Us:
Shanghai Aeinsen Sensor Technology Co., Ltd. (hereinafter referred to as Aeinsen), located in the national intelligent sensor innovation center of Shanghai intelligent sensor Industrial Park (SISP), one of the first characteristic industrial parks in Shanghai, has in-depth cooperation with relevant sensor enterprises in Thuringia, Germany, and is in charge of the R & D and production technology of advanced industrial grade sensors, Shanghai Jiading factory (process industry PA) and Shaanxi Baoji factory (discrete industry FA) have been established in China, with the production capacity of batch high-precision pressure transmitters.
Aeinsen's technical team is composed of industry experts with many years of sensor R & D, production and manufacturing, and enjoys a high reputation in the field of high-precision monocrystalline silicon and diffused silicon sensors; The experienced marketing team closely combines German high-quality technology with domestic flexible and active on-site service, and serves every customer all over the world with the concept of "empathy and win-win with customers and creating value for customers".
Aeinsen has good technical reserves and on-site experience in the fields of water conservancy and hydropower, petrochemical industry, aerospace, marine engineering and shipping, food and medicine. Through close cooperation with customers, it has the ability to solve special application solutions for complex working conditions in many industries.
Aeinsen not only grasps Germany's high-quality sensor technology, but also makes use of the regional advantages of the national intelligent sensor innovation center to cooperate with adjacent scientific research institutes such as Shanghai Institute of micro technology industry, Institute of Technical Physics of Chinese Academy of Sciences, Shanghai Institute of silicate of Chinese Academy of Sciences and Shanghai University, making continuous breakthroughs and progress in the latest fields of the sensor industry, Promote the transformation and upgrading of intelligent construction and enter a new era of industrial IOT.
We are a start-up company founded in this year 2021 but we aiming to dedicated in pressure transmitter and sensor industry. Although we founded in 2021, but our team members all have over 10 years in R&D and manufacturing of transmitter production and even more than half of our team have over 20 years professional experiences.
For transmitter industry, as a traditional industry, with the technology developing, ANS team devote ourselves to response our customer faster and in time; always provide better solution and more valuable suggestion.
Our mission is Focus on sensing , make future intelligent!FAQ:1.Q:Are you manufacturer or trading company? A:We are manufacturer.Our team members all have over 10 years in R&D and manufacturing of transimitter production and even more than half of our team have over 20 years professional experiences.
2.Q: What international certificates do you have? A:ISO9001, the other certifications are to be continued...(eg. SGS,CE, Ex-proof,Rohs,Ul)
3.Q: Do you provide customized products A:Yes, we could design and manufacture the goods according customer's requirement. We will provide the information sheet for your requirement details.we supply the free lable for our esteemed customer for your own logo print. There are 3 type of lable could be choosed: printed, laser, lableplate, depends on the material of goods.
4.Q: What is the warranty of your products? And after-sales service?
A:We will react ASAP, less than 24 hours. And we have 1 V 1 customer service, we have each professional engineer for your technology or installation solution support. And once we dealed, we will provide logistic track until it arrived.
5.Q: What is lead time of your product?
A:Our lead time is always within 10~15 working days for products without customization.
Address:
Room 504, Building 1, No. 333, Huangqing Rd, Jiading District, Shanghai, China
Business Type:
Trading Company
Business Range:
Construction & Decoration, Electrical & Electronics, Industrial Equipment & Components, Instruments & Meters
Management System Certification:
ISO 9001
Company Introduction:
Shanghai Aeinsen Sensor Technology Co., Ltd. (also known as ANS), is located in SISP (Shanghai intelligent sensor Industrial Park), the very first started features and advantages industrial center in Shanghai. ANS has deep cooperation with German transmitter company which has the advanced R& D and production technique of industry transmitter over the world. ANS established two manufacturing bases in Shanghai (PA) and Shaanxi (FA), and possessing mass production lines of transmitters.
ANS team full of the transmitter professional experts in R& D, manufacturing, and production what makes ANS enjoy great reputations. Our marketing team serve customers all over the word with the combination of the high-tech from Germany and satisfied site-solution services. We aiming to get win-win with our customer and create values for both.
ANS has the good technologies and solution experiences in water conservancy and hydropower engineering, petrochemical industry, aerospace, marine and ships, food and medicine industry. Also giving great solutions for many different complicated applications.
ANS keeps cooperating with the high-tech research institutions, as SITRI, SITPCAS, SICCAS, and Shanghai university based on the original Germany technology. ANS is improving and developing in transmitter industry and upgrade the intelligent contribution in the "internet of things" time.
Our Story
We are a start-up company founded in this year 2021 but we aiming to dedicated in pressure transmitter and sensor industry.
Although we founded in 2021, but our team members all have over 10 years in R& D and manufacturing of transmitter production and even more than half of our team have over 20 years professional experiences.
For transmitter industry, as a traditional industry, with the technology developing, ANS team devote ourselves to response our customer faster and in time; Always provide better solution and more valuable suggestion.
Our mission is Focus on sensing, make future intelligent!
){kind=link}